Virnig V50 Skeleton Tooth Grapple
Virnig
$7,375.00
(No reviews yet)
Write a Review
Virnig
Virnig V50 Skeleton Tooth Grapple
Upgrade your grapple with teeth! The V50 Skeleton Tooth Grapple by Virnig is the sam eas the V50 Skeleton Grapple but with added series 23 pin on teeth. The teeth on this grapple will easily dig through the soil and pull out roots and rocks without damaging or wearing on the grapple. The teeth are replaceable by removing a single pin.
- Series 23 Pin on teeth for digging out rocks and roots and through soil
- Unbroken solid unbroken tine design for maximum strength and performance
- Teflon coated busings and pivots for smooth operation
- Standard cylinder guards
| Model | TSGV72 | TSGV78 | TSGV84 | TSGV90 | ||
|---|---|---|---|---|---|---|
| Overall Width (in.) | 73.5 | 79.5 | 85.5 | 91.5 | ||
| Height: Overall / Bucket (in.) | 27.5 / 21.3 | |||||
| Overall Depth (in.) | 43.3 | |||||
| Number of Tines (With Sides) | 8 | 9 | 9 | 10 | ||
| Space Between Teeth (in.) | 6.8-8.8 | 6.3-8.8 | 6.8-9.3 | 6.8-8.8 | ||
| Space Between Tines (in.) | 5.5 | |||||
| Tine and Side Plate Thickness (in.) | 0.5 | |||||
| Cylinder Bore / Stroke (in.) | 2.0/8.375 | |||||
| Cylinder Pins / Hinge Pins Diameter (in.) | 1.25 / 1.563 | |||||
| Grapple Jaw Opening (in.) | 40.9 | |||||
| Approximate Weight (lbs.) | 1,005 | 1,055 | 1,095 | 1,145 | ||
| Recommended Loader Capacity (lbs.) | Greater than 1,500 lbs. | |||||
